Ovens & Cookers — Teslec Electrical Services
A new electric oven or cooker is one of the most common kitchen upgrades made by South Wales homeowners every year — and one of the most important to get connected correctly. Electric Ovens and Cookers draw significantly more current than most household appliances, and connecting them safely requires a dedicated circuit, correctly sized cable, and the right connection point installed by a qualified professional. Whether you’re replacing an old unit with a brand new one, upgrading from gas to electric, or installing a built-in oven as part of a full kitchen renovation, the electrical connection must be done right — and Teslec Electrical Services does it right, every time.
At Teslec Electrical Services, our fully qualified Electrician team connects, installs, and commissions electric Ovens and Cookers throughout South Wales — safely wired to current BS 7671 wiring regulations, with the correct dedicated circuit and connection point in place before any appliance is powered up.
How Can We Help?
Oven & Cooker Electrical Services We Offer
⚡ New Oven & Cooker Installation
Installing a new electric Oven or Cooker for the first time — whether it’s a freestanding range, a built-under double oven, or a built-in single oven as part of a new kitchen — requires a dedicated 6mm² circuit from the consumer unit, terminated at a correctly rated cooker connection unit or outlet plate. This is not a job for an existing socket or an extension lead — electric Ovens and Cookers require their own circuit, protected by the correct MCB at the consumer unit, and connected through a properly rated and correctly positioned isolator. Teslec Electrical Services installs new Oven and Cooker circuits throughout South Wales — from consumer unit to connection point, fully tested and certified before the appliance is used for the first time.
⚡ Oven & Cooker Replacement
Replacing an existing electric Oven or Cooker with a new model is the most common job our team carries out in this category across South Wales — and while it might appear straightforward, it still requires a qualified Electrician to disconnect the old appliance safely, inspect the existing circuit and connection point, and connect the new unit correctly. The existing circuit must be confirmed as suitable for the new appliance’s current draw, and the connection point checked for condition before the new Oven or Cooker is wired in. Teslec Electrical Services handles Oven and Cooker replacements throughout South Wales efficiently and professionally — old unit disconnected, new unit connected, everything tested and confirmed working before we leave.
⚡ Gas to Electric Cooker Conversion
Switching from a gas Cooker to an electric or induction model is an increasingly popular choice across South Wales — driven by the wider shift away from gas appliances, the growing availability of excellent electric and induction ranges, and the practical advantages of cooking on induction. Converting from gas to electric requires a new dedicated Cooker circuit to be installed from scratch — the gas supply is a matter for a Gas Safe registered engineer, but the electrical supply for the new appliance is exactly the type of work Teslec Electrical Services carries out throughout South Wales. Our Electrician team installs the new dedicated circuit, the correctly rated isolator, and the connection point ready for the new appliance — coordinating with the wider kitchen project as needed.
⚡ Built-In Oven Installation
A built-in Oven — installed into a housing unit at eye level or under-counter as part of a fitted kitchen — requires a correctly positioned connection point inside the housing, with the cable routed neatly through the cabinet and back to the dedicated circuit. The connection point must be accessible without tools for isolation purposes, and the circuit must be correctly rated for the oven’s load. Teslec Electrical Services installs built-in Ovens throughout South Wales as part of both new kitchen installations and one-off appliance upgrades — neatly wired, correctly routed, and with the connection point positioned correctly within the housing unit.
⚡ Range Cooker Electrical Installation
A range-style electric or dual-fuel Cooker — a large freestanding unit with multiple ovens and a full-width hob — draws a higher current than a standard domestic Oven and must be assessed individually to confirm the correct cable size and circuit rating for that specific appliance. Many South Wales homes have an existing Cooker circuit that may have been installed for a smaller appliance and is not sized for a high-draw range. Teslec Electrical Services assesses the existing circuit honestly and installs or upgrades the supply to the correct specification for your specific range Cooker — no assumptions, no undersizing, and no compromise on the connection standard.
⚡ Cooker Circuit Upgrades
An older Cooker circuit — installed years or decades ago for a smaller or lower-rated appliance — may not be suitable for a new, higher-specification Oven or Cooker without assessment and potential upgrading. Common issues include undersized cable that cannot safely carry the current of a modern appliance, an MCB at the consumer unit rated incorrectly for the circuit, or a connection unit that is worn, damaged, or no longer in the correct position relative to the new appliance. Teslec Electrical Services assesses and upgrades existing Cooker circuits throughout South Wales wherever an upgrade is needed — working through the complete circuit from consumer unit to connection point to confirm every element is correctly specified.
⚡ Cooker Connection Units & Outlet Plates
A cooker connection unit — the switched isolator mounted on the wall near the Oven or Cooker that allows the appliance to be safely isolated without going back to the consumer unit — is a required element of every correctly installed Cooker circuit. If your existing connection unit is in the wrong position for a new appliance, has been damaged, or was never installed in the first place, Teslec Electrical Services installs and relocates cooker connection units and outlet plates throughout South Wales — correctly positioned relative to the appliance and wired correctly to the existing or upgraded circuit.
⚡ Oven & Cooker Installation as Part of a Kitchen Renovation
New kitchen installations across South Wales regularly involve a new Oven, Cooker, or both — and the electrical work for the appliances needs to be coordinated carefully with the rest of the kitchen fit. Teslec Electrical Services works alongside kitchen fitters, builders, and project managers throughout South Wales to deliver the Oven and Cooker electrical installation at the right stage of the project — with the circuit in place and the connection point correctly positioned before the appliances arrive, and the final connection and commissioning completed cleanly once the kitchen installation is complete.
Why Choose Teslec Electrical Services for Your Oven or Cooker Installation?
Electric Ovens and Cookers are among the highest-current domestic appliances in any home — and connecting them without the correct dedicated circuit, correct cable sizing, and correct connection point creates risks that aren’t always visible but that matter every time the appliance is used. A qualified Electrician from Teslec Electrical Services ensures every Oven and Cooker connection is made correctly, tested thoroughly, and safe to use from the very first time you switch it on.
- ✅ Fully qualified and registered Electrician — over 23 years of experience
- ✅ All Oven and Cooker circuits wired to current BS 7671 wiring regulations
- ✅ New installations, replacements, upgrades, and gas-to-electric conversions all covered
- ✅ Built-in ovens, freestanding cookers, and high-draw range cookers all handled
- ✅ Existing circuit assessment included — no undersized cables or incorrect breakers left in place
- ✅ Cooker connection units and outlet plates supplied and installed correctly
- ✅ Transparent pricing — free no-obligation quotes on all Oven and Cooker electrical work
- ✅ Covering Cardiff, Vale of Glamorgan, Rhondda Cynon Taf, Bridgend, Caerphilly, Merthyr Tydfil, and across South Wales
Areas We Cover For Ovens & Cookers
As your local Electrician team for Oven and Cooker electrical installations across South Wales, Teslec Electrical Services covers a wide area. Click your region below to find out more about the electrical services we offer where you live:
Get a Free Quote for Your Oven or Cooker Installation
Whether you’re connecting a brand new electric Oven, replacing an old Cooker with a new model, upgrading to a range Cooker for the first time, or making the switch from gas to electric as part of a kitchen renovation, Teslec Electrical Services is ready to help. Contact our qualified Electrician team today for a free, no-obligation quote — we cover the whole of South Wales and we’ll always give you honest, straightforward advice on the right electrical installation for your appliance.